Tool Standards

The most economical manufacturing of fineblanking tools can be done if the die sets and their components are manufactured in series.

Therefore, SCHMID has designed a standard line of die sets, which is available from stock. A full set of detailed drawings is provided with each press.

For each type of press, SCHMID has different sizes of standard die sets. The choice depends on the size of the fineblanking component.

1. Top die shoe
2. Bottom die shoe
3. Guide plate
4. Top back-up block
5. Bottom back-up block
6. Guide pin
7. Punch
8. Punch retainer with adjusting plate
9. V-Ring plate
10. Guide bushing
11. Adjusting plate
12. Punch retainer with adjusting plate
13. Ejector
14. Die
15. Piercing punch retainer
16. Guide bushing